Recycling Industry Iron Sand Casting Parts

We always work as a visible team to ensure we can provide you with the best quality and best price for Recycling Industry Iron Sand Casting Parts. We warmly welcome friends from all over the world to cooperate and create a more brilliant tomorrow. Products are exported to Europe, America and other countries and regions. The products have passed the national qualified certification and have been well received in the main industries in our country. Our expertise has been recognized by hydraulic systems customers for Recycling Industry parts.

Product Parameter (Specification)

Maple’s Service for Mining Industry

As a specialist in Casting Recycling Industry Iron Sand Casting Parts, Maple machinery is qualified to produce key parts for the Recycling Industry for a variety of uses. Each of the different metals and alloys used has specific properties that give parts different mechanical strength, light and electrical conductivity capabilities. Therefore, they are selected to suit each application based on precise specifications drafted in conjunction with the customer. Maple machinery will support you at all stages of the industrialisation of your project, including validation of casting and forging work..

Supporting Service for Mining Components

◉ As mentioned above, in order to work in adverse conditions, the performance of the Recycling Industry Iron Sand Casting Parts must be excellent. Therefore, it’s not enough to only produce raw castings or forgings, but also need heat treatment, machining, surface treatment, NDT testing, etc.

◉ Heat treatment: heat treatment is the critical step to improve the mechanical properties of the workpiece. We can formulate the process according to the strength requirements of the parts, and improve the mechanical properties of the parts such as hardness, yield strength, tensile strength and elongation by heat treatment

◉ Machining: we have our own machine shop, and can complete almost all machining requirements with advanced equipment.

◉ Surface treatment: the purpose of surface treatment is to make parts work in adverse environment. Zinc plating can prevent parts from rusting; Nickel plating can enhance the wear resistance and corrosion resistance of parts; Phosphating can prevent parts from corrosion…

◉ Non-destructive testing (NDT): NDT is the last and most important step. Maple will NDT the parts to ensure that there are no surface defects (such as cracks, sand holes, blow holes) and no internal defects (shrinkage and slag) on the delivered parts.

Common Material for Mining Industry

We have the ability to manufacture all steel standard materials as well as special materials. The following are our common materials for manufacturing Recycling Industry Iron Sand Casting Parts :

Carbon Steel：1015, 1020, 1035, 1045, 20Mn, 25Mn, A570.GrA, SJ355, C45…

Alloy Steel：4130, 4135, 4140, 4340, 8620, 8640, 20CrMo, 42CrMo4, 34CrNiMo6, 25CrMo…

Stainless steel：304, 304L, 316, 316L, 410, 416, CF8, CF8M, PH17-4, CK20…

Gray Iron：GG-15, GG-20, GG-25, Class 20B, Class 25B, Class 30B, GJL-250, GJL-300…

Ductile Iron：GGG-40, GGG-50, 60-40-18, 65-45-12, 70-50-05, 80-55-06 QT500-7, QT400-18, QT700-2…

High Chromium cast iron：15%Cr-Mo-HC, 20%Cr-Mo-LC, 25%Cr…

Aluminum：AlSi7Mg, AlSi12, AlSi10Mg, A356, A360…

High Manganese steel: X120Mn12, Mn12, Mn13…

The Parts We Supplying for The Mining Industry

We have manufactured a wide range of Recycling Industry Iron Sand Casting Parts. The following are typical products:Valve joint, Ball valve body, Gate valve body, Choke valve body, Beer valve body,Purification water brass,Hybrid valve, ....

Why Sand Casting

Sand casting is an ancient casting process where the metal parts are molded by pouring metal into a hollow cavity. The mold-based manufacturing process is used to make castings with materials of iron, steel, and Aluminum. Casting-based manufacturing includes several steps and can create a wide range of shapes and sizes for metal products. The process begins with the making of a mold pattern and a gate system with the exact size and shape of the required part. The temperature required depends on the metal as some metals take a long time to heat and melt.

Maple Machinery has continuously upgraded its Sand-casting equipment and refined the casting process. The aim behind this is to use only the advanced casting technology for its Sand-casting operations. Each step follows the customer’s drawings and instructions to deliver precise solutions.